MAGA DIAMOND 10 days nail polish

  1. The set consists of a colour and a Top Coat - using a base coat or a conditioner before applying the colour will help to keep your nail plate in perfect condition, although it is not required
  2. Prepare the nail plate as always before the application of hybrids or enamels
  3. Degrease nail plate with cleaner
  4. Apply the first layer of the colour - like a regular nail enamel
  5. Wait about 1 minute
  6. Apply the second coat of the colour - like a regular nail enamel
  7. Wait about 1 minute
  8. Onto the not yet dried second coat, apply a fairly thick layer of Top Coat - forming a drop at the tip of the brush, usually you will need to dip the brush in the bottle 2 or 3 times for each nail.
  9. Wait 4.5 minutes (in this time, you can additionally harden the product)
  10. To achieve the best result, apply another layer of the Top Coat after the previous layers have dried.
  11. Finished!

The finished manicure can be additionally hardened by UV light exposure. When the Top Coat is drying, in order to achieve maximum durability you should:
- go out into the daylight
- use an UV lamp (180 seconds) or a UV LED lamp (90 seconds

To remove the enamel, all you need is an ordinary nail polish remover and a few cotton pads! No more soaking nails with acetone - press a cotton pad soaked with acetone against the nail, wait 5 seconds and wash off the enamel.

UV Nail Polish

Step 1 Before you start working, disinfect the nail plate and cuticles - you can do it with the Cleaner.
Step 2 Use a stick or a metal cuticle pusher to gently move the cuticles back. If necessary, you can cut off a part of them with a special disinfected tool.
Step 3 Shape the nail with a 180 grit nail file. Smooth the nail plate surface gently - be careful not to take the gloss off it.
Step 4 Remove the dust that appears and degrease the nails with the Cleaner. Wait for about a minute before the next step.
Step 5 Apply a thin coat of a base suitable for your nail plates. Find one for yourself here (link to base coat products). Harden it in a 48W UV LED lamp for 30 sec or a 36W UV lamp for 2 minutes. Do not wash the nails now.
Step 6 Apply a thin coat of your chosen colour. Harden it in a 48W UV LED lamp for 30 sec or a 36W UV lamp for 2 minutes. Do not wash the nails now. Then repeat the step until you achieve full opacity.
Step 7 Apply your chosen Top Coat, painting precisely over the free edge of the nail. Find one for yourself here (link to top coat products). Harden it in a lamp for the time specified for your product. In the case of the Liquid Crystals Top Coat, wash it with a cotton bud soaked with the Cleaner.
Step 8 Finally apply some nail oil, e.g. I LOVE PARIS in order to hydrate the cuticles.
REMOVAL:
For quick removal of the enamel, we suggest filing off the top coat and the outer layer of the enamel with a nail file (100 grit). Soak a cotton bud in Cosmetic Acetone and press it against the enamel, and then wrap it in aluminium foil. After 10 minutes, remove the enamel using a stick or a cuticle pusher. Do not do it forcibly! The enamel should freely detach from the nail plate. If there are any remains left of the enamel, remove them with a nail buffer.
We recommend taking a week's break between two applications of hybrid enamels. During the break, it is worth using the Instant MAGA conditioner and your favourite enamel from the Diamond 10 days nail polish collection.

Nail extensions

Step 1 Before starting work, disinfect the nail plate and cuticles - you can do it with the Cleaner.
Step 2 Use a stick or a metal cuticle pusher to gently move the cuticles back. If necessary, you can cut off a part of them with a special disinfected tool.
Step 3 Shape the nail with a 180 grit nail file. Smooth the nail plate surface gently - be careful not to take the gloss off it
Step 4 Place an extension form under the nail.
Step 5 Apply a thin coat of the HARD base. Harden it in a 48W UV LED lamp for 30 sec or a 36W UV lamp for 2 minutes. Do not wash the nails now.
Step 6 Apply a coat of the HARD base onto the nail and the form. Harden it under a 48W UV LED lamp for 30 sec or a 36W UV lamp for 2 minutes. Do not wash the nails now.
Step 7 Remove the form and apply a thicker version of the HARD base to make the right shape. Harden it in a 48W UV LED lamp for 30 sec or a 36W UV lamp for 2 minutes. Do not wash the nails – you can repeat this step as many times as you need.
Step 8 Wash the nails with the Cleaner and form them into the desired shape with a 180 grit nail file. Sand the top surface gently.
Step 9 Remove the dust that appears and degrease the nails with the Cleaner. Wait for about a minute before the next step.
Step 10 Apply a thin coat of a base suitable for your nail plates. Harden it in a 48W UV LED lamp for 30 sec or a 36W UV lamp for 2 minutes. Do not wash the nails now.
Step 11 Apply a thin coat of your chosen colour. Harden it in a 48W UV LED lamp for 30 sec or a 36W UV lamp for 2 minutes. Do not wash the nails now. Then repeat the step until you achieve full opacity.
Step 12 Apply your chosen Top Coat, painting precisely over the free edge of the nail. Harden it in a lamp for the time specified for your product. In the case of the Liquid Crystals Top Coat, wash it with a cotton bud soaked with the Cleaner within 10 seconds after taking your hand out of the lamp.
Step13 Finally apply some nail oil, e.g. I LOVE PARIS in order to hydrate the cuticles.
CHANGING THE COLOUR:
If you want to change only the colour, remove it with a nail file (or a milling machine) and replace only the base (after disinfecting the nail plate). Then apply the colour and the top coat.
REMOVAL:
For quick removal of the enamel, we suggest filing off the top coat and the enamel with a nail file (100 grit). Soak a cotton bud in Cosmetic Acetone and press it against the enamel, and then wrap it in aluminium foil. After 10 minutes, remove the enamel using a stick or a cuticle pusher. Do not do it forcibly! The enamel should freely detach from the nail plate. If there are any remains left of the enamel, remove them with a nail buffer.